3D Case 4 -Welding and testing Peel-Strength

There are a lot of different parameters to test to find out if the formed nugget is acceptable for a certain application. Very often, welding engineers investigate the parameters related to the mechanical properties of the nugget.

To measure the mechanical properties of the nugget, different mechanical tests are used such as tensile strength test, cross tension test, hardness measurements etc. These tests can help to evaluate if the weld nugget has an acceptable strength for the application.

SORPAS® 3D.testing can help to evaluate the weld strength based on simulations with actual welding and joining conditions. SORPAS® 3D.testing has also integrated standard templates for workpieces which makes it easier for the user to set up the welding design.

In this tutorial you will see how to make a welding simulation and how to make a Peel strength test on the welded workpieces.

This tutorial demonstrates how to build a model with one spot weld and test the weld strength of the nugget. It shows how to add testing tools to the workpieces. To demonstrate this case simple, no change of materials and process parameter is done, we use default settings.

The example provides an excellent overview of building a model and doing weld strength testing. It demonstrates how to build a model, adding contact interface and adding testing tools.

More information about Weld Strength Test is in the help menu, -> Weld Strength Test.

Download full instruction