Buch:
Anwendungen in der Metallumformung und im Widerstandsschweißen.
LEBENSLAUF. Nielsen et al. Veröffentlicht von Springer 2013.
Technische Publikationen zu Entwicklungen und Anwendungen von SORPAS®
2022
Jong-Jung Lee, Young Whan Park and TaeHyung Na
Under Review at The International Journal of Advanced Manufacturing Technology, August 2022
2021
76. Resistance element welding of sandwich laminates with hidden inserts
Calado, F.N., Pragana, J.P., Bragança, I.M., Silva, C. and Martins, P.A.,
The International Journal of Advanced Manufacturing Technology, September 2021
Eric W. Schulz, Matthias Wagner, Holger Schubert, Wenqi Zhang, Bharat Balasubramanian & Luke N. Brewer
Metall Mater Trans A, September 2021
SCHULZ, M. WAGNER, H. SCHUBERT, W. ZHANG, B. BALASUBRAMANIAN, AND L. N. BREWER
WELDING JOURNAL, MARCH 2021
SCHULZ, M. WAGNER, H. SCHUBERT, W. ZHANG, B. BALASUBRAMANIAN, AND L. N. BREWER
WELDING JOURNAL, FEBRUARY 2021
Günter, H., Meschut, G.
Welding in the world, 2021
71. Cross-wire welding analyzed by experiments and simulations
C.V. Nielsen, W. Zhang, N. Bay, P.A.F. Martins,
Journal of Advanced Joining Processes, Volume 3, 2021
2020
Siva Prasad Murugan, Jong Bae Jeon, Changwook Ji, Yeong-Do Park
Welding in the World, August 2020
Ali Chabok, Ellen van der Aa, Yutao Pei
Materials Science and Engineering: A, Volume 788, 2020
Najuch, M., S. Jüttner, and D. Schmicker.
IOP Conference Series: Materials Science and Engineering. Vol. 882. No. 1. IOP Publishing, 2020
67. Joining of Thermoplastic Composites with Metals Using Resistance Element Welding
Troschitz J, Vorderbrüggen J, Kupfer R, Gude M, Meschut G.
Applied Sciences. 2020; 10(20):7251.
66. Four types of LME cracks in RSW of Zn-coated AHSS
Murugan, S. P., V. Vijayan, C. Ji, and Y. D. Park.
Welding Journal 99 (2020): 75-92.
65. Automotive battery pack manufacturing – a review of battery to tab joining
M.F.R. Zwicker, M. Moghadam, W. Zhang, C.V. Nielsen,
Journal of Advanced Joining Processes, Volume 1, 2020
2019
Siva Murugan,Kaisar Mahmud,Changwook Ji, Ilguk Jo & Yeong-Do Park.
Welding in the World, Le Soudage Dans Le Monde. August (2019)
63. Resistance spot weld bonding of steel sheets
Szymon Kowieski1, Jolanta Matusiak
Welding Technology Review 91, no. 10 (2019): 25-33.
Lee, Hyungsoo, Min Chul Jo, Seok Su Sohn, Sang-Heon Kim, Taejin Song, Sung-Kyu Kim, Hyoung Seop Kim, Nack J. Kim, and Sunghak Lee
Materials Characterization. 2019 Jan 1;147:233-41.
61. Micro-resistance spot welding of cylindrical battery packets in FEM calculations
Zygmunt Mikno1 and Szymon Kowieski
Welding Technology Review 91.8 (2019): 43-52
60. Transient Softening at the Fusion Boundary of Resistance Spot Welds
Oleksii Sherepenko , Omid Kazemi, Paul Rosemann, Markus Wilke, Thorsten Halle, and Sven Jüttner
MPDI, Metals Journal, December 2019.
59. Spot Weld Strength Modeling and Processing Maps for Hot-Stamping Steels
2018
58. Resistance Spot Welding Characteristic of 1500MPa Steel Sheet Using Simulation II
Jong-Jung Lee*, Chang-soek Son*, and Young Whan Park*,†
*Dept. of Mechanical Engineering, Pukyung National University, Busan, 48513, Korea
57. Resistance Spot Welding Characteristic of 1500MPa Steel Sheet Using Simulation I
Jong-Jung Lee*, Chang-soek Son*, and Young Whan Park*,†
*Dept. of Mechanical Engineering, Pukyung National University, Busan, 48513, Korea
56. Effect of Welding Time on Resistance Spot Weldability of Aluminum 5052 Alloy
Oleksii Sherepenko & Sven Jüttner
Welding in the World. 2018:1-9
Wenqi Zhang, Swantec Software and Engineering ApS
53. On the Performance of Thin-Walled Crash Boxes Joined by Forming
Silva, D.F.M.; Silva, C.M.A.; Bragança, I.M.F.; Nielsen, C.V.; Alves, L.M.; Martins, P.A.F.
Materials 2018, 11, 1118.
52. Characterization of Loading Responses and Failure Loci of a Boron Steel Spot Weld
N. D. Raath, D. Norman, I. McGregor, S. Hepple, R. Dashwood, D. J. Hughes
Metallurgical and Materials Transactions A, Volume 49, Issue 6, May 2018
51. The Resistance Spot Weldability of a Stainless Steel/Aluminium/Low Carbon Steel 3-Ply Clad Sheet
Siva Prasad Murugan, Muralimohan Cheepu, Vijeesh Vijayan, Changwook Ji, Yeong-Do Park
Journal of Welding and Joining 2018, 36(1)
50. Weld Processing and Mechanical Responses of 1-GPa TRIP Steel Resistance Spot Welds
R. ASHIRI, S. P. H. MARASHI, Y.-D. PARK
Welding Journal, 2018
49. Analysis of resistance welding processes and expulsion of liquid metal from the weld nugget
Zygmunt Mikno, Adam Pilarczyk, Marcin Korzeniowski, Paweł Kustroń, Andrzej Ambroziak
Archives of Civil and Mechanical Engineering, Volume 18, issue 2, February 2018
2017
48. Thermo-mechanically affected zone in AA6111 resistance spot welds
Sainan Wu, Bita Ghaffari, Elizabeth Hetrick, Mei Li, Qing Liu, Zhihong Jia
Journal of Materials Processing Technology, Volume 249, November 2017
47. Effect of Weld Schedule on the Residual Stress Distribution of Boron Steel Spot Welds
N. D. Raath, D. Norman, I. McGregor, R. Dashwood, D. J. Hughes
Metallurgical and Materials Transactions A, Volume 48, Issue 6, June 2017
46. Optimization of resistance welding by using electric servo actuator
Zygmunt Mikno, Mariusz Stepien, Boguslaw Grzesik
Welding in the World, Volume 61, Issue 3, May 2017
2016
45. Liquid metal embrittlement-free welds of Zn-coated twinning induced plasticity steels
Ashiri, Rouholah, Morteza Shamanian, Hamid Reza Salimijazi, Md Anwarul Haque, Jin-Hee Bae, Chang-Wook Ji, Kwang-Geun Chin, and Yeong-Do Park.
Scripta Materialia 114 (2016): 41-47.
K. Taniguchi, H. Matsuda, R. Ikeda and K. Oi
Welding International, volume 30, 2016 – Issue 11
J. Shim and S. Rhee
Journal of the Korean Society of Manufacturing Technology Engineers 25:5 (2016) 373~379
42. Simulation and optimisation of resistance welding using the SORPAS software programme
Z. Mikno, Sz. Kowieski and W. Zhang
Biuletyn Instytutu Spawalnictwa w Gliwicach vol. 60, No.4 (2016): 13-22.
Banerjee, P., Sarkar, R., Pal, T. K., & Shome, M
Journal of Materials Processing Technology 238 (2016): 226-243.
Eller, T. K., Greve, L., Andres, M., Medricky, M., Geijselaers, H. J. M., Meinders, V. T., & van den Boogaard, A. H.
Journal of Materials Processing Technology 234 (2016): 309-322.
39. Heating of electrodes during spot resistance welding in FEM calculations
Z. Mikno and Z. Bartnik
Archives of Civil and Mechanical Engineering 16(1):86-100, January 2016.
2015
Taniguichi Koichi, Okita Yasuaki, Ikeda Rinsei
JFE Technical Report No. 20 (Mar. 2015)
37. Influence of surface pretreatment in resistance spot welding of aluminum AA1050
Ihsan K. Al Naimi, Moneer H. Al Saadi, Kasim M. Daws & Niels Bay
Production & Manufacturing Research, 3:1, 185-200, 2015
36. Study on High-Strength Steel Spot Welding Process Design and Optimization Based on SORPAS
Su Zhipu
Proceedings of SAE-China Congress 2015, pp. 545-558.
35. Improved resistance spot weldability of 3rd generation AHSS for automotive applications
E.M. van der Aa, M. Amirthalinham, J. Winter, David Neal Hanlon, M.J.M. Hermans and M. Rijnders
11th International Seminar on Numerical Analysis of Weldability, Graz, Seggau, Austria; 09/2015.
34. Weld nugget formation in resistance spot welding of new lightweight sandwich material
J. Sagüés Tanco, C. V. Nielsen, A. Chergui, W. Zhang and N. Bay
International Journal of Advanced Manufacturing Technology 80(5-8), September 2015.
33. Numerical methods in simulation of resistance welding
C. V. Nielsen, Paulo A.F. Martins, W. Zhang and N. Bay
VI International Conference on Computational Methods for Coupled Problems in Science and Engineering, April 2015.
32. 3D numerical simulation of projection welding of square nuts to sheets
C. V. Nielsen, W. Zhang, P.A.F. Martins and N. Bay
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University 49(1): 80-85, January 2015.
31. Numerical simulation of projection welding between hot-stamped steel and low-carbon steel
Z.-X.Wan, M.Wang, H.-L. Jiao, B.-E. Gao and X. -T. Lu
Journal of Materials Processing Technology, Volume 215, January 2015, p.171-180.
30. Influence of surface pretreatment in resistance spot welding of aluminum AA1050
Ihsan K. Al Naimi, Moneer H. Al Saadi, Kasim M. Daws & Niels Bay (2015)
Production & Manufacturing Research, 3:1, 185-200,
DOI: 10.1080/21693277.2015.1030795
2014
29. Three-dimensional simulations of resistance spot welding
Chris V Nielsen, Wenqi Zhang, William Perret, Paulo AF Martins, and Niels Bay
J Automobile Engineering 2015, Vol. 229(7) 885–897 IMechE 2014
DOI: 10.1177/0954407014548740
2011
28. Three-Sheet Spot Welding of Advanced High-Strength Steels.
C. V. Nielsen, K. S. Friis, W. Zhang and N. Bay
Welding journal, Vol. 90, February 2011, pp32-40.
2009
27. Experimental and computer simulation results of the spot welding process using SORPAS software.
M A Al-Jader et al
J. Phys.: Conf. Ser. 178 012045. 2009.
N. Athi et al
Measurement, Vol. 42, No. 6, July 2009, pp944-953.
2008
25. Using Simulation for Investigations of Hot Cracking Phenomena in Resistance Spot Welding of 6xxx Aluminum Alloys (AA6016 and AA6181)
Eder A., Jaber S., Jank N.
In: Böllinghaus T., Herold H., Cross C.E., Lippold J.C. (eds) Hot Cracking Phenomena in Welds II. Springer, Berlin, Heidelberg, 2008
2007
24. Monitoring the Effect of RSW Pulsing on AHSS using FEA (SORPAS) Software.
M.I. Khan et al
SAE Special Publication Papers, SP-2139, Document Number: 2007-01-1370, April 2007.
2006
23. Simulation Software Helps Automakers.
N. Scotchmer
Welding Journal, Vol. 85, No. 8, August 2006, pp47-49.
22. Lowering Costs by Simulating Design of Complex Welds .
K. R. Chan and P. Edwards
AWS Sheet Metal Welding Conference XIII. Livonia, Michigan. May 10-12, 2006.
21. Effect of Electrode Geometry on Resistance Spot Welding of AHSS.
K. R. Chan, N. Scotchmer, J. C. Bohr, I. Khan, M. L. Kuntz and Y. N. Zhou
AWS Sheet Metal Welding Conference XIII. Livonia, Michigan. May 10-12, 2006.
20. Contact Modelling in Resistance Welding. Part 2: Experimental Validation.
Q. Song, W. Zhang and N. Bay
Journal of Engineering Manufacture, Vol. 220, No. 5, 2006, pp607-613.
19. Contact Modelling in Resistance Welding. Part 1: Algorithms and Numerical Verification.
Q. Song, W. Zhang and N. Bay
Journal of Engineering Manufacture, Vol. 220, No. 5, 2006, pp599-606.
18. Recent Advances and Improvements in the Simulation of Resistance Welding Processes.
W. Zhang
IIW-1721-05 (ex-doc. III-1345-05), Welding in the World , Vol. 50, No.3/4, 2006, pp29-37.
2005
17. An Experimental Study Determines the Electrical Contact Resistance in Resistance Welding.
Q. Song, W. Zhang, N. Bay
Welding Journal, Vol. 84, No. 5, May 2005, pp73s-76s.
16. Characterization of Dynamic Mechanical Properties of Resistance Welding Machines.
P. Wu, W. Zhang and N. Bay:
Welding Journal, Vol. 84, No.1, January 2005, pp17s-21s.
2004
15. Weld Bonding of Stainless Steel.
I. O. Santos, W. Zhang, V. M. Gonçalves, N. Bay and P. A. F. Martins
International Journal of Machine Tools and Manufacture, Vol.44, No.14, 2004, pp1431-1439.
14. Simulation of Resistance Welding for Industrial Applications
W. Zhang
Presented at Sheet Metal Welding Conference XI, Detroit, Michigan, May 11-14, 2004.
13. Determination on Maximum Follow-up Speed of Electrode System of Resistance Projection Welders
P. Wu, W. Zhang and N. Bay
International Journal for the Joining of Materials, Vol.16, No.2, 2004, pp33-36.
2003
12. A Method for Identifying the Mechanical Parameters in Resistance Spot Welding Machines
P. Wu, W. Zhang and N. Bay
International Journal for the Joining of Materials, Vol.15, No.4, 2003, pp26-29.
11. Industrial Applications of Computer Simulation in Resistance Welding
W. Zhang
International Journal for the Joining of Materials, Vol.15, No.3, 2003, pp9-16.
10. Design and Implementation of Software for Resistance Welding Process Simulations
W. Zhang
SAE 2003 Transactions: Journal of Materials and Manufacturing, Vol.112, No.5, 2003, pp556-564.
2001
9. Studies of Geometric Parameters in Projection Welding of Different Material Combinations (in German)
L. Kristensen, W. Zhang and N. Bay
18th DVS-Sondertagung “Widerstandsschweissen 2001”, Duisburg, Germany, May 2001, pp76-80.
2000
8. Numerical and Experimental Investigation of Geometric Parameters in Projection Welding
L. Kristensen, W. Zhang and N. Bay
The 10th Int. Conf. on Computer Technology in Welding, Copenhagen, Denmark, June 2000, pp.21.1-21.11.
1999
7. Finite Element Modeling of Resistance Spot and Projection Welding Processes
W. Zhang and L. Kristensen
The 9th Int. Conf. on Computer Technology in Welding, Detroit, Michigan, September 1999, NIST Special Publication 949, pp.15-23.
6. Influence of Geometric Parameters on Weld Quality in Resistance Projection Welding
L. Kristensen, W. Zhang and N. Bay
The 9th Int. Conf. on the Joining of Materials, JOM-9, Helsingør, Denmark, May 1999. pp.112-117.
5. Finite Element Modeling of Resistance Welding Processes
W. Zhang
The 9th Int. Conf. on the Joining of Materials, JOM-9, Helsingør, Denmark, May 1999. pp.54-59.
1998
4. Finite Element Modeling Aided Process Design in Resistance Welding
W. Zhang and N. Bay
The 8th Int. Conf. on Computer Technology in Welding, Liverpool, UK, June 1998, pp.36.1-11.
1997
3. Verification of an FEM Program for Spot Welding
L. Kristensen, W. Zhang, M. Malberg and N. Bay
The AWS Conference on Resistance Welding: Theory and Applications, Chicago, USA, October 1997. pp.182-208.
2. Finite Element Modeling of Spot Welding Similar and Dissimilar Metals
W. Zhang, H. Hallberg and N. Bay
The 7th Int. Conf. on Computer Technology in Welding, San Francisco, USA, July 1997, NIST Special Publication 923, pp.364-373.
1. Finite Element Modeling of the Heat Development in Resistance Welding – with an industrial example for projection welding of dissimilar metals
W. Zhang and T. Funder-Kristensen:
The 8th Int. Conf. on the Joining of Materials, JOM-8, Helsingør, Denmark, May 1997, pp.226-233.